> Using the Image Engine

Type of machine images:

- Machine picture with a pendulum system, if the movement rule
images with the help of ballast (pendulum) with the aim that
ruler image if not in use is still in a state of tense
which means that still remain in place initially because
tension assisted with ballast rule. But if not
using a pendulum, the ruler image if not used
always under the drawing board, making it less practical
early users.

- Machine picture with the Tracker system, consisting of horizontal bars
and vertical. Horizontal rod serves as a place
Conductor rod or vertical position in the movement to
right and left. If the vertical bar as the locus
drawing machine that moves up and down.

Engine parts drawings Tracker

1. Handel Horizontal
2. Handel Vertical
3. Regulatory screw Ruler
4. Handel Precision Ruler
5. Handel Regulatory Angles
6. Handel Angle Accuracy
7. Handel Pengerak Fine
8. Screw Opener Ruler
9. Regulatory screw Kesikuan

Function parts-drawing machine bagiain Tracker

Handel Horizontal
Function for a picture machine crossbar can not move to the right
nor to the left so it can only move upwards and downwards
vertically, when handelnya locked.

Handel Vertical
Function for a picture machine crossbar can not move up
or down so only to move to the right and left
below the horizontal direction, if handelnya locked.

Regulatory screw Ruler
If the desire not to touch mistarnya drawing board
because they want to pull paper when you finish drawing the picture
drawing paper or install if want to start drawing.
The purpose of doing this work for practically no need to open
rule openly. As for how it works simply by rotating
screw-clockwise or vice versa.

Handel Precision Ruler
Function handle this is to match the image with ruler
paper to fit the edges with the road relaxes
and when it is appropriate handelnya handelnya dikecangkan again. So
laying of drawing paper can be haphazard. However, if
crowd used for example in schools should not cultivated
play it if not forced to handle.

Handel Regulatory Angles
Allows you to set the required angle ruler
it's just that with multiples of 15 º and can be locked automatically
if handelnya released.

Handel Angle Accuracy
Where the regulator handle to a multiple of 15 º angle, to handle
angle accuracy can be used in position 17 º, 22 º, 38 º
which obviously is not a multiple of 15 º. But still, beginning with
create or free up stubborn regulator first corner
new set point is then handel accuracy
angle toned. When you have unwanted handelnya
returned to normal position.


Handel Pengerak Fine
Once we set up the paper and then use the handle
precision ruler to set the bar on drawing paper, then
differences may still exist for it for the right position
used the handle smooth mover with a detour
screws for the handle bar tetapt position then tightened.
And this can also be done on an existing drawing paper
pictures posted on the drawing board and then for the line
still coincides with the ruler then use the handle smooth mover.

Screw Opener Ruler
Ruler images often dirty because of the ink stick. For
cleaning is sometimes not enough to clean up
the ruler is installed, but need to open up for Facebook
clean, then use a screw opening in terms of rule
retrieve and install mistarnya.

Regulatory screw Kesikuan
In drawing the ruler that is used should really
elbow. To check our picture machine crossbar kesikuan
using a ruler triangle really kesikuannya already
checked. Triangle ruler is placed between the crossbar and then drawing machine
seen already coincide or not, if not coincide then
kesikuan regulator screws are located first and then relaxed
dihimpitkan picture machine crossbar when it coincides with the triangle
screw can be tightened again. For adequate arrangements
in a single screw are used.

READ MORE - > Using the Image Engine

> Adhesive tape

Adhesive tape also called cellulose tape, usually used for
drawing paper attached to the drawing board.

Adhesive tapes are there different kinds, namely:

- Thick adhesive tape
- Thin adhesive tape
- Double adhesive tape (alternating)
- Colored adhesive tape
- Transparent adhesive tape for tracing.

For tracing usually worn thin adhesive tape, because the power
lekatnya strong, not easy to shift and does not cause gross
on paper.

But if the table gambanya coated magnet then simply
using a thin steel plate.

READ MORE - > Adhesive tape

> Using Various Ruler

Triangle
Triangle is used to draw a line straight, oblique or
parallel. Materials used mostly transparent mica because
light. Usually used in a pair of triangles are triangles
with angle 45o - 45o and a triangle, with angle 60o - 30o.

How to use:
Before a triangle or a tool of this type are used, should be examined
formerly with the following eligibility requirements:

- The edge of the ruler (the triangle) should be flat
- Should really elbow (90o)

After review and found the tool in good condition,
then the triangle can be used in accordance with its function,
namely to make a straight line or make a line perpendicular
that must be considered in this regard are:

- Point the pencil perpendicular (90 °) to the triangle
- 80o tilt towards the pull of a pencil line
- Draw a line in pencil while playing

Ruler Picture
Ruler image is also used to draw a straight line in the distance
long. Ruler picture (sketch Haak) is usually made of
wood or mica. But there's also made of wood and mica.
Ruler picture consists of two parts, namely the rule that
ruler length and the head angle 90o.

When using the ruler image, the head of the ruler
images must be sealed on the side table held picture
with his left hand. But for a lefty should seek alternative
Another rule is to look for specific images.

Ruler images used to create horizontal lines, can also
to make a point of 30o, 45o, 60o or 90o to the rescue
triangle. After use should be hung on a nail bar
so as not to become crooked.

READ MORE - > Using Various Ruler

> Adhesive tape

Adhesive tape also called cellulose tape, usually used for
drawing paper attached to the drawing board.

Adhesive tapes are there different kinds, namely:

- Thick adhesive tape
- Thin adhesive tape
- Double adhesive tape (alternating)
- Colored adhesive tape
- Transparent adhesive tape for tracing.

For tracing usually worn thin adhesive tape, because the power
lekatnya strong, not easy to shift and does not cause gross
on paper.

But if the table gambanya coated magnet then simply
using a thin steel plate.

READ MORE - > Adhesive tape

> Using Various Ruler

Triangle
Triangle is used to draw a line straight, oblique or
parallel. Materials used mostly transparent mica because
light. Usually used in a pair of triangles are triangles
with angle 45o - 45o and a triangle, with angle 60o - 30o.

How to use:
Before a triangle or a tool of this type are used, should be examined
formerly with the following eligibility requirements:

- The edge of the ruler (the triangle) should be flat
- Should really elbow (90o)

After review and found the tool in good condition,
then the triangle can be used in accordance with its function,
namely to make a straight line or make a line perpendicular
that must be considered in this regard are:

- Point the pencil perpendicular (90 °) to the triangle
- 80o tilt towards the pull of a pencil line
- Draw a line in pencil while playing

Ruler Picture
Ruler image is also used to draw a straight line in the distance
long. Ruler picture (sketch Haak) is usually made of
wood or mica. But there's also made of wood and mica.
Ruler picture consists of two parts, namely the rule that
ruler length and the head angle 90o.

When using the ruler image, the head of the ruler
images must be sealed on the side table held picture
with his left hand. But for a lefty should seek alternative
Another rule is to look for specific images.

Ruler images used to create horizontal lines, can also
to make a point of 30o, 45o, 60o or 90o to the rescue
triangle. After use should be hung on a nail bar
so as not to become crooked.

READ MORE - > Using Various Ruler

> Drawing straight lines Straight

Perpendicular

By triangle

1. Put the sloping sides of a triangle such that 45o-45o
coincides with the line 1 which is known and the bottom
detained by the other triangle.
2. Rotate triangle of 45o-45o 90o (see arrows
B) then the hypotenuse will be perpendicular to line l. Sliding
triangles (see arrow b) if necessary.
3. Pull the line m.

Line Tilt

READ MORE - > Drawing straight lines Straight

> Drawing Parallel Lines & Curves

Drawing Parallel Lines
To membuata parallel lines, the first one used triangular
guidelines should not be moved. Put the following triangle
The second line in accordance with the desired direction and pull the line.
Next slide the second triangle in accordance with the distance
desired then tarisk lines and so on.

Drawing Curved Lines
To make a curved line using the term should
first determined the radius of a circle or round center circle.
For example, the radius of the circle center of M1 is greater than the radius
M2 center circle

- Create a central axis line of rotation curves of M1 and M2
appropriate large radius.
- Make a half circle with a term from the center of M1, then
proceed to make a half circle with a term in
M2 centers, then it happens that berbubungan curved lines,
See picture below.

To create curved lines with curved mall should
attention to the point where that will be connected to
curvature does not seem awkward or do not comply. Try
withdrawal line through 3 connecting points as possible, if
forced to connecting only with the 2 points should be viewed
truth curve.

Specified an arbitrary point A, B, C, D and E

- Find the mall curve corresponding to the third arch
points A, B and C
- Find more malls to suit curved arch C, D
and E
- It turns out the curved lines for A, B, c, d and e are not aligned
- The curve C, D and E canceled
- Use the mall curved to point C and D only, but
estimated arches connecting or so one
- And lastly make arc from point D and E for
The next arch connecting the mall looking for a suitable
- The pull of arch can be seen the following image.

READ MORE - > Drawing Parallel Lines & Curves

> Dividing Lines

Line AB is divided into two parts equal in length.
a. Create two circular arcs with A and B as
center, the radius R arbitrary. Both bow to each other
intersect in a and b
b. Pull the line ab which cuts AB at C
c. Then AC = CB

Divide the line AB into parts of the same length.
(For example, is divided into 8 parts)
a. Pull any line (from A)
b. The size of the line ah part of the same length
term using Aa = ab = bc = cd = de = ef = fg = gh
c. Connect the dots with B h
d. Pull of the points: g, f, e, d, c, b, a, a line parallel
HB line these lines will cut AB in dots
which divide into 8 equal parts long.

READ MORE - > Dividing Lines